25 thoughts on “Yachting Monthly’s Crash Test Boat Dismasting”
what a bunch of freakin idiots!!!!!!!!!
Crew should be wearing helmets. Recently, during Cape2Rio regatta, one
sailor died after the same problem in a Bavaria 55.
Been in similar situation. Glider 30ft yacht. for real.Start of race Off
Penarth. Bristol. Channel. Quite hairy.
Great video. Had the same problem one year ago, 38ft yacht. I was alone and
it took almost 24 hours to clean the mess and free the propeller from guys
and wires, Needed to spend the night anchored in moderately deep water and
4ft waves before I had assistance to remove the broken rig from the water
and return to the marina. My mast broke in three parts, exactly the same. A
missing clevis in the shroud turnbuckle caused the whole problem.
OMG! No mast in 30 mph.
Mast breuk zeiljacht onder vol tuig :
try a Drimmel tool. battery operated and cut cable in a flash. Less than
70 bucks.
oops! looks like my own summer-experience at the northsea……..
If you intent is to provide a mast recovery exercise to novices, great. But
if you are honestly looking to understand how or why a rig fails, perhaps
you might apply a bit of science and engineering? Contrary to your
introduction, it was entirely predictable that the rig would buckle at the
lower shroud attachment point when it was in place and the upper shroud
parted. It was also predictable that, given no backstay tension and
under-trimmed jib, that the mast would fall to leeward. Get serious
That wire was already half way hacked through if you look closely. It takes
a while and it is frustrating to hack saw though 1×19. The best tool is
probably the bullet blast thingy. Quick and effortless. The Hydraulic
cutters are great but cost about $2k depending on what size wire you need
to cut.
You’ll see how we did this in the next video in the series: Jury Rigs
difficult to understand this guys accent
Great video – very informative thanks. I broke a mast recently in a laser.
Different scale I know but the same issues – big surprise followed by “what
do I do now.” Managed to sail downwind with scrap of sail and mast left
standing.
What would sailboats without a mast be if not motor boats? Give me a break.
Top movie. Thanks a lot.
7:00 Perfect time to have a drink of Coca Cola
Maybe not:-)
a blow boat with no mast is no powerboat… not by a long shot, blow boats
are slow and clumsy… power boats can go very fast and they are highly
maneuverable… also, powerboat owners hardly ever disrespect the wind but
blow boaters almost always disrespect the whole powerboat scene
Has anyone designed an unbreakable mast yet?
no helmets?!
You should really cut them some slack here. This was a neat video which
demonstrates what happens when a mast breaks. Of course they could have
asserted that the mast would fall to leeward. Not a guarantee, but most
likely the mast will ALWAYS fall to leeward with the sails up. They did a
neat experiment and had to consolidate it down to a 15 min. video so that
it is watchable. It had my attention the whole way through. TOO critical.
You go make a video like this and then let me at the comments
What kind of boat is that. Im
by suprise is an under statement…… dismasted a 20 ft e-boat it was more
than a suprise……
what a bunch of freakin idiots!!!!!!!!!
Crew should be wearing helmets. Recently, during Cape2Rio regatta, one
sailor died after the same problem in a Bavaria 55.
Been in similar situation. Glider 30ft yacht. for real.Start of race Off
Penarth. Bristol. Channel. Quite hairy.
Great video. Had the same problem one year ago, 38ft yacht. I was alone and
it took almost 24 hours to clean the mess and free the propeller from guys
and wires, Needed to spend the night anchored in moderately deep water and
4ft waves before I had assistance to remove the broken rig from the water
and return to the marina. My mast broke in three parts, exactly the same. A
missing clevis in the shroud turnbuckle caused the whole problem.
OMG! No mast in 30 mph.
Mast breuk zeiljacht onder vol tuig :
try a Drimmel tool. battery operated and cut cable in a flash. Less than
70 bucks.
oops! looks like my own summer-experience at the northsea……..
If you intent is to provide a mast recovery exercise to novices, great. But
if you are honestly looking to understand how or why a rig fails, perhaps
you might apply a bit of science and engineering? Contrary to your
introduction, it was entirely predictable that the rig would buckle at the
lower shroud attachment point when it was in place and the upper shroud
parted. It was also predictable that, given no backstay tension and
under-trimmed jib, that the mast would fall to leeward. Get serious
That wire was already half way hacked through if you look closely. It takes
a while and it is frustrating to hack saw though 1×19. The best tool is
probably the bullet blast thingy. Quick and effortless. The Hydraulic
cutters are great but cost about $2k depending on what size wire you need
to cut.
You’ll see how we did this in the next video in the series: Jury Rigs
difficult to understand this guys accent
Great video – very informative thanks. I broke a mast recently in a laser.
Different scale I know but the same issues – big surprise followed by “what
do I do now.” Managed to sail downwind with scrap of sail and mast left
standing.
What would sailboats without a mast be if not motor boats? Give me a break.
Top movie. Thanks a lot.
7:00 Perfect time to have a drink of Coca Cola
Maybe not:-)
a blow boat with no mast is no powerboat… not by a long shot, blow boats
are slow and clumsy… power boats can go very fast and they are highly
maneuverable… also, powerboat owners hardly ever disrespect the wind but
blow boaters almost always disrespect the whole powerboat scene
Has anyone designed an unbreakable mast yet?
no helmets?!
You should really cut them some slack here. This was a neat video which
demonstrates what happens when a mast breaks. Of course they could have
asserted that the mast would fall to leeward. Not a guarantee, but most
likely the mast will ALWAYS fall to leeward with the sails up. They did a
neat experiment and had to consolidate it down to a 15 min. video so that
it is watchable. It had my attention the whole way through. TOO critical.
You go make a video like this and then let me at the comments
What kind of boat is that. Im
by suprise is an under statement…… dismasted a 20 ft e-boat it was more
than a suprise……